Prism Flex Snake
A chunky faceted snake that flexes, coils, and clacks. Prints already assembled.
Ships in 2–4 days · printed to order in the color they pick
No magnets, no batteries, no paint — raw name-brand filament only. Recommended ages 3+.
Original Xeno 3D design
The full story
This one comes off the printer already moving — every joint is printed in place, so there is nothing to snap together and nothing to lose. The faceted segments give it a satisfying clack as it coils around your wrist or slithers across a desk. Joints are deliberately overbuilt so it survives being flexed the wrong way by an enthusiastic seven-year-old. Pick a length from 30 to 75 cm — the longer ones coil furthest around a wrist. Made to order in-house, finished by hand, and checked over before it ships. Need a color, size, or finish you don't see here? Drop us a note and we'll sort it out.
Material & care
Printed in premium PLA+ or PETG depending on application. Wipe clean with a damp cloth. Avoid prolonged direct sun for PLA+ items; choose PETG or ASA for outdoor use — just ask.
Specifications
- Print process
- FDM, produced to order
- Layer height
- 0.16–0.20 mm
- Finish
- Off build plate / textured
- Filament used
- ~90 g
- Print time
- ~4.5 h
- Recommended age
- 3+
- Lead time
- 2–4 business days
You may also like
Twist Star Tower
A spiral star that collapses flat and springs back. Quiet enough for a classroom.
Clik Rail Slider
A thumb slider with a real click and zero magnets. The spring is printed in.
Orbit Gear Spinner
A planetary gearset you can hold. Prints meshed together; the herringbone teeth keep it that way.
My Name Tracing Board
Their own name, carved as grooves they trace with a chunky stylus until writing clicks.